Difference between pages "ZEDIT" and "REDIT"

From 4Dimensions
(Difference between pages)
Jump to: navigation, search
(Bot: Automated import of articles)
 
m
 
Line 1: Line 1:
−
'''ZEDIT'''
+
'''REDIT'''
 
[[Category:Help Files]]
 
[[Category:Help Files]]
 +
[[Category:Building]]
 +
[[Category:Commands]]
 +
REDIT
  
−
ZEDIT
+
1)  Make Each Word In The Room Name Capitalised Like This
  
−
ZEDIT
+
2)  Remember to type /c before typing in the new description.
  
−
ZEDIT
+
3)  Check on the board what the different FLAGS do.
  
−
B) Enter the name of the Builders here, with a space between the names.
+
Always set INDOORS in rooms that are sector inside.
  
−
You can enter more names than one, but don't erase your own name, or
+
Use the !MOB flag sensibly to keep wandering mobs penned in.
−
you'll lose access to the zone.
 
−
Z) Enter zone name, Builder's name and the level range for the zone here.
 
  
−
Use the following format: (10 40) The Range /Molly
+
4)   The sector type MUST be set properly! This is important!
−
X) Enter the dimension the zone is for.
 
  
−
L) Lifespan decides the time between resets of a zone. For a low level zone
+
5-B) see HELP DOORS
  
−
it should be short (30 minutes,) for a high level at least 180 minutes.
+
C    You can set a different room description for nighttime (10 PM to 5 AM)
−
T) Top of zone is set by the code, don't touch this!
 
  
−
If you need more than 100 rooms for the zone, this need to be set by a
+
E-G) These descs are good for hiding stuff (Quests etc.) Use with sense. *)
−
Head Builder, or you can use two different zones.
 
−
R) The reset mode should be Normal in most cases.
 
  
−
F) Remove the CLOSED Flag, or the mobs won't be able to move around. Check
+
H-I) Smell and listen descs should be set, but can be similar in most rooms
  
−
the board to see what the other Flags do.
+
S    This is used to set a script on the room.
−
Reset Commands:
 
  
−
* To make a reset, first type N (New), then 0 (number in the reset list)
+
Q    To quit the editor type q and y.
−
* Then decide the type, for instance M (Mob), O (object) or D (door).
 
−
* If the reset number isn't 0 you'll get the question:
 
−
*; Is this command dependant on the previous?
 
−
*; If the command is E (equip), G (give) or P (put) type yes, otherwise no.
 
−
* Type in the vnum of the mob/object
 
−
* The max allowed should normally be 100, unless you want it restricted.
 
−
For more info about Zedit, type HELP RESETS
 
  
−
See also [[HELP]] [[REDIT]]  [[MEDIT]]  [[OEDIT]]  [[RESET]]  [[SEDIT]]  [[DOORS]]  [[COLOUR]]  [[OLC]]
+
Type redit save <zone#> every time you quit redit.
 +
 
 +
* When you use any of the extra descs, (C, E, F, G), there should always be
 +
*; a hint to the keyword somewhere in the main room or object descs.
 +
See also [[HELP]] [[REDIT]]  [[MEDIT]]  [[OEDIT]]  [[ZEDIT]]  [[RESET]]  [[SEDIT]]  [[DOORS]]  [[COLOURLIST]]

Latest revision as of 17:30, 23 June 2017

REDIT REDIT

1) Make Each Word In The Room Name Capitalised Like This

2) Remember to type /c before typing in the new description.

3) Check on the board what the different FLAGS do.

Always set INDOORS in rooms that are sector inside.

Use the !MOB flag sensibly to keep wandering mobs penned in.

4) The sector type MUST be set properly! This is important!

5-B) see HELP DOORS

C You can set a different room description for nighttime (10 PM to 5 AM)

E-G) These descs are good for hiding stuff (Quests etc.) Use with sense. *)

H-I) Smell and listen descs should be set, but can be similar in most rooms

S This is used to set a script on the room.

Q To quit the editor type q and y.

Type redit save <zone#> every time you quit redit.

  • When you use any of the extra descs, (C, E, F, G), there should always be
    a hint to the keyword somewhere in the main room or object descs.

See also HELP REDIT MEDIT OEDIT ZEDIT RESET SEDIT DOORS COLOURLIST

Retrieved from "http://4dimensions.org/wiki/index.php?title=ZEDIT&oldid=1203"